www.ti.com
2 Test Setup
This section describes how to properly connect and setup the LP8864EVM.
2.1 LP8864EVM Kit
The LP8864EVM kit contains (see
•
USB2ANY
– Ribbon cable
– USB cable
•
LP8864EVM
•
LP886X-LEDLOAD-EVM
2.2 System and Equipment Requirements
•
DC power supply: 24 V or higher, 6 A or higher
•
LED cable: 5-position ribbon cable
•
PC to run GUI software
•
GUI software
SNVU731 – NOVEMBER 2020
Submit Document Feedback
Figure
2-1):
Figure 2-1. LP8864EVM Kit
Copyright © 2020 Texas Instruments Incorporated
Test Setup
LP8864 Evaluation Module
3