Ycc-S Clutch; Fittings And Fasteners; Instruments, Lights And Switches; Control Cables - Yamaha YXZ1000ET Owner's Manual

EBU36672

YCC-S clutch

Check the YCC-S clutch fluid level and cor-
rect if necessary. (See page 9-49.)
Check the operation of the drive select lever
and shift paddles at the start of each drive.
TIP
 If the YCC-S clutch fluid level was low, be
sure to check the clutch system for leak-
age.
 If any leakage is found, or if shifting is not
6
smooth, have a Yamaha dealer service the
vehicle.
EBU35700

Fittings and fasteners

Always check the tightness of chassis and
wheel fittings and fasteners before starting
off. Take the vehicle to a Yamaha dealer or re-
fer to the Service Manual for correct tighten-
ing torque.
EBU31840

Instruments, lights and switches

Check that all instruments, lights and switch-
es are working properly. Correct if necessary.
EBU31851

Control cables

When driving in cold weather, always make
sure all control cables work smoothly before
starting off. WARNING! Control cables can
freeze in cold weather and you could be
unable to control the vehicle.
EBU37893

Tires

Check and adjust the tire pressure before
each ride. Check tires for wear and damage.
6-8
[EWB03280]