Yamaha YXZ1000ET Owner's Manual page 188

3. Remove the battery holding plate by re-
moving the bolts.
2
1
1. Battery holding plate
2. Bolt
4. Disconnect the negative battery lead first,
then the positive battery lead by remov-
9
ing their bolt. NOTICE: When removing
the battery, the main switch must be
off, and the negative lead must be dis-
connected before the positive lead.
[ECB01002]
1. Positive battery lead (red)
2
2. Negative battery lead (black)
3. Battery
5. Pull the battery out of its compartment.
To charge the battery
 Remove it from vehicle and confirm the rec-
ommended charging rate as specified on
the battery itself.
 Select a suitable charger and follow the
manufacturer's instructions, or have a
Yamaha dealer charge it for you.
9-61
2
3
1