Clutch Adjustment - Yamaha Badger YFM80M Owner's Manual

EBU00345

Clutch adjustment

1. Remove the rubber cap.
2. Loosen the locknut.
3. Slowly turn the adjusting bolt clockwise
until resistance is felt. Then turn it 1/8
counterclockwise.
1. Rubber cap 2. Locknut
4. Tighten the locknut to the specified
torque.
Tightening torque:
8 Nm (0.8 m•kg, 5.8 ft•lb)
q w
e
3. Adjusting bolt
NOTE:
Turn the adjusting bolt clockwise to decrease
the clutch free play and turn it counterclock-
wise to increase the free play.
5. Install the rubber cap securely.
8-22