Differential Gear Oil - Yamaha YXZ1000ET Owner's Manual

7. Install the oil filler bolt and its gasket, and
then tighten the bolt to the specified
torque.
Tightening torque:
Final gear oil filler bolt:
22 N·m (2.2 kgf·m, 16 lb·ft)
8. Check for oil leakage. If oil leakage is
found, check for the cause.
EBU36064

Differential gear oil

Check the oil level and change the differential
gear oil at the intervals specified in the period-
ic maintenance chart.
ECB03600
NOTICE
When checking or changing the differen-
tial gear oil, make sure that no foreign ma-
terial enters the differential gear case. If
necessary, clean the differential gear oil
filler bolt and surrounding area.
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
Oil quantity:
0.18 L (0.19 US qt, 0.16 Imp.qt)
TIP
If the recommended gear oil is not available,
SAE 80W-90 API GL-4 or GL-5 hypoid gear
oil may be used instead.
Checking the differential gear oil level
1. Park the vehicle on a level surface.
2. Remove the differential gear oil filler bolt
and its gasket, and then check the oil lev-
el. It should be up to the brim of the filler
hole.
9-34
9