Cleaning The Spark Arrester - Yamaha YXZ1000ET Owner's Manual

EBU35141

Cleaning the spark arrester

EWB03370
WARNING
Hot exhaust system may cause burns. To
avoid burns or fires, make sure that the en-
gine is stopped and the exhaust system is
cool before cleaning the spark arrester. Do
not start the engine while cleaning the ex-
haust system.
1. Remove the tailpipe cover by removing
the tailpipe cover bolts.
1
1. Tailpipe cover
2. Tailpipe cover bolt
2
2
9-46
2. Remove the tailpipe bolts.
1
1. Tailpipe bolt
3. Remove the tailpipe by pulling it out of
the muffler, and then remove the gasket.
4. Tap the tailpipe lightly, and then use a
wire brush to remove any carbon depos-
its from the spark arrester portion of the
tailpipe and inside of the tailpipe housing.
1
9