Mebx; Main Menu; Intel(R) Me General Settings - DFI WL051-BCC-B User Manual

X MEBX

Main Menu

Select MEBx Login under Main Menu and press Enter. A prompt that requires password input
will show up.
1. Enter the default password "admin".
2. Enter a new password and then press Enter. The password must include
- 8-32 characters;
- Strong 7-bit ASCII characters excluding : , and " characters;
- At least one digit character (0, 1, ...9);
- At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;);
- At least one lower case and one upper case characters.
3. Enter the new password again to verify the new password.
User's Manual | WL051

Intel(R) ME General Settings

Select Intel(R) ME General Settings under Main Menu and then press Enter.
Chapter 4
INTEL AMT SETTINGS
43