Front Panel - DFI WL051-BCC-B User Manual

Internal I/O Connectors
X

Front Panel

„ Front Panel Pin Assignment
Pin Assignment Pin Assignment
1 PWSIN 2 3V3SB
3 GND 4 SUS_LED
5 RESET 6 HD_LED
„ Front Panel Pin Combination
Pin Name Pin Name
2 3V3SB
PWR-LED PWR-SW
4 SUS_LED
2 3V3SB
HD-LED RESET
6 HD_LED
User's Manual | WL051
1 PWSIN
3 GND
3 GND
5 RESET
PWR-LED - Power/Standby LED
When the system's power is on, this LED will light. When the system is in the S1 (POS - Power
On Suspend) state, it will blink every second. When the system is in the S3 (STR - Suspend To
RAM) state, it will blink every 4 seconds.
HD-LED - Hard Drive LED
This LED will light when the hard drive is being accessed.
PWR-SW - Power Switch
This switch is used to power on or off the system.
RESET - Reset Switch
This switch allows you to reboot without having to power off the system.
Chapter 2
HARDWARE INSTALLATION
21