Reset - Alinco DR-MD520T Instruction Manual

8

RESET

A. Power off the radio.
B. Then power it on while holding the [P2] and the channel switch at the
same time.
C. The radio will start up with a note on the display – "Are you sure you
want to initialize radio?"
Press Exit to exit the reset and power on the radio.
Press Confirm to proceed the reset, it will come with a screen display
note – Initialize Radio.
D. After a re-start the radio will display the setting of time zone and the
date and the time. Use the channel switch to set the current year.
Move to the month by pushing the channel switch. Set the month, and
use the channel switch key to move forward each step. Once done,
click the Confirm key to save the date and time.
Please remember set up the time zone to avoid the date/time error.
Make sure the codeplug is saved to PC before your do the update and
reset.
25