Advanced Features For Private Call; Access Advanced Features For Private Call; Set Up Advanced Features For Private Call - Alinco DR-MD520T Instruction Manual

6

Advanced Features for Private Call

Access Advanced Features for Private Call

Method 1: To Access a Private Call from Contact list
a. Press the [MENU] key to enter the Talk Group, select a private call ID.
b. Press Option to access the advanced features.
Method 2: Access from Manual Dial
a. Press the [MENU] key to enter theTalk Group, select Manual Dial.
b. Input the Private ID, press Option to access the advanced features.

Set Up Advanced Features for Private Call

Call Alert
(1)
Select Call Alert, it will send out a call alert, the target radio will sound a
beep or vibrate when receiving the call alert, and it will return a success
call or failed call message to the transmit radio.
Remote Monitor
(2)
Select Remote Monitor, and it will send out a signal for the target radio
13
will turn on its microphone and transmit when receiving the signaling, it
will send back the voice to the transmit radio. With this feature you can
monitor the sound activity near the target radio remotely.
**You have to check on the function in CPS-Optional Setting-Digital
Func- Remote Monitor first.
Get GPS info
(3)
Select Get GPS info, and it will send out a signal to the target radio which
will start the GPS positioning and send a message of its GPS position to
the transmit radio.
**You have to check on the function in CPS-Optional Setting-GPS/
Ranging- Get GPS positioning first.
Check Radio
(4)
Select Check Radio, and it will send out a radio check to the target radio
which will send back a message if it is available or not available to the
transmit radio. With this feature, you can determine if another radio is
active and powered on in the system.
Kill
(5)
Select Kill, and it will send out a kill signaling to the target radio which
will be killed (No display, no operation) when receiving the signaling and
it will send back a kill successful message to the transmit radio.
**You have to check on the function in CPS-Optional Setting-Digital
Func- Digital Remote Stun&Kill first.
Wake
(6)
Select Wake, and it will send out a wake signaling to the killed radio and
the target radio will return to standby when it receives this signaling and
send back a Wake successful message to the transmit radio.
**You have to check on the function in CPS-Optional Setting-Digital
Func- Digital Remote Stun&Kill first.
Ranging
(7)
When caller and receiver both GPS positioned, if the caller turn on
ranging function and the receiver is within communication range, Tx
radio will detect the distance and direction between two radios at fixed
interval, and then show the information on the display of Tx radio.