Settings - Alinco DR-MD520T Instruction Manual

7
MAIN MENU FUNCTIONS
Roaming Zone
(2)
Select Roam Zone: select a Roaming Zone from the list to set it as
active zone. You can also scroll down the list of Zones and select Add
Channel to add a new channel to the current Roaming Zone and set the
parameters.
Select Add Channel: Add a new roaming channel to the current zone.
New Roam Ch: Allows you modify the RX frequency/TX frequency/
CC/ TS/CH name for the roaming channel. Also allow you remove the
roaming channel from the zone.
Edit Name: Edit the zone name.
Select Zone: Select the roaming zone for current channel.
Delete Zone: Delete the roaming zone from the current channel.
Auto Roaming settings
(3)
Set the fixed time waiting interval to begin automatic roaming when the
repeater cannot be found, roaming will begin at the end of this time.
15
On/Off: Turn on or turn off the auto roaming function.
Fixed Time Set: The roaming will be started at preset fixed time or set to
off.
Start Roaming:
Fixed Time: Starts timed roaming
Repeater check: The roaming will be started when the radio cannot find
a repeater - "The repeater is out of range" icon will appear, then the radio
will perform roaming one time, and return to roaming off automatically.
Repeater Check
(4)
On/Off: Turn on this function will allow the radio to check the repeater
status.
Interval Set: When the repeater is out of range, the radio will try
reconnect to the repeater, this function allows to set the interval for
reconnections.
OutRange Note
(5)
When the repeater is out of range after the repeater check, the radio will
remind out of range.
Note kind: It allows to set beep or sound to remind out of range.
Note Times: It allows to set the "out of range" display times on screen.
Effect wait
(6)
During roaming, when the radio finds a repeater within range, it will stay
at the repeater for a short time. This function allows to set the stay time
on the repeater.

Settings

1. Radio Set
Beep
(1)
Beep On: The radio will beep when you press the keypad
Beep Off: No beep when you press the keypad.
Speaker Mode
(2)
Mic Spk: Allows the voice come out from the speaker on microphone.
Radio Spk: Allows the voice come out from the speaker on radio.
Both: Allows the voice come out from both speakers on microphone and
on radio.
Mic Spk Set
(3)
When you allows the voice come out from the speaker on microphone,
you have to set it is for A channel or B channel.
A channel: Only the voice from A channel will come out.
B channel: Only the voice from B channel will come out
Back Light
(4)
LCD backlight intensity is adjustable in 5 steps
Ch. Name
(5)
CH name: The radio will work in channel mode and display the channel