Bluetooth Module - HP Compaq 6530s Maintenance And Service Manual

Bluetooth module

Description
Broadcom Bluetooth module for use in all countries and regions except Japan and Asia Pacific
Broadcom Bluetooth module for use only in Japan and Asia Pacific
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover (see
d. Keyboard (see
e. Speakers (see
f. Display assembly (see
g. Top cover (see
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable (1) from the system board.
2. Remove the Bluetooth module cable (2) from the routing path.
3. Remove the Phillips PM2.0×4.0 screw (3) that secures the Bluetooth module to the base enclosure.
Battery on page 46).
Hard drive on page 47)
Optical drive on page
Switch cover and keyboard on page
Switch cover and keyboard on page
Speakers on page 61)
Display assembly on page
Top cover on page 68)
55)
57)
57)
62)
Component replacement procedures
Spare part number
398393-002
450066-001
73