HP Compaq 6530s Maintenance And Service Manual page 72

2. If it is necessary to replace the display bezel, display inverter, or display hinges, remove the eight
rubber screw covers (1) and the eight Torx T8M2.5×6.0 screws (2) that secure the display bezel
to the display assembly. The rubber screw covers are available in the Rubber Kit, spare part
numbers 497622-001 (for use only with HP Compaq 6535s Notebook PC models) and 491654-001
(for use only with HP Compaq 6530s and 6531s Notebook PC models).
3. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
bezel until the bezel disengages from the display enclosure.
4. Remove the display bezel (3). The display bezel is available using spare part numbers 497619-001
(for use only with HP Compaq 6535s Notebook PC models without a webcam), 497617-001 (for
use only with HP Compaq 6535s Notebook PC models with a webcam), 491636-001 (for use only
with HP Compaq 6530s and 6531s Notebook PC models with a webcam), and 491635-001 (for
use only with HP Compaq 6530s and 6531s Notebook PC models without a webcam).
64 Chapter 4 Removal and replacement procedures