Switch Cover And Keyboard - HP Compaq 6530s Maintenance And Service Manual

Switch cover and keyboard

Description
Switch covers (includes power button board and cable)
For use only with HP Compaq 6535s Notebook PC models
For use only with HP Compaq 6530s and 6531s Notebook PC models
Keyboards for use in the following countries or regions:
Brazil
Japan
Latin America
South Korea
Before removing the switch cover and keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the switch cover and keyboard:
1. Remove the following screws:
(1) Two slotted Torx ST8M2.5×7.0 screws
(2) Two Torx T8M2.0×2.0 broadhead (9-mm) screws
491653-201 Taiwan
491653-291 Thailand
491653-161 The United States
491653-AD1
Battery on page 46).
Spare part number
497614-001
491663-001
491653-AB1
491653-281
491653-001
Component replacement procedures 57