Speakers - HP Compaq 6530s Maintenance And Service Manual

Speakers

Description
For use only with HP Compaq 6535s Notebook PC models
For use only with HP Compaq 6530s and 6531s Notebook PC models
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover (see
6. Remove the keyboard (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board and remove the speaker cable from the
clips and routing channel.
NOTE:
2. Remove the four Phillips PM2.5×4.0 screws (2) that secure the speakers to the top cover.
3. Remove the speakers (3) from the top cover.
Reverse this procedure to install the speakers.
Battery on page
Switch cover and keyboard on page
Switch cover and keyboard on page
The two speakers are connected with a single cable.
46).
57).
Component replacement procedures
Spare part number
493173-001
491656-001
57).
61