Compaq Armada V300 Series Reference Manual page 83

You can configure most communications software without the use
of AT commands or dial modifiers.
If you prefer to configure the modem using AT commands,
select StartÆProgramsÆAccessoriesÆHyperTerminal.
To access an AT command set including dial modifiers and
instructions, go to the Compaq Internet site at
To uninstall the modem software and hardware under
Windows NT 4.0, you must log into Windows NT 4.0 with
Administrator privileges. To uninstall the modem software and
hardware under Windows 95, Windows 98, or Windows NT 4.0:
1. Click StartÆSettingsÆControl Panel.
2. Double-click the Add/Remove Programs icon.
3. Select the Compaq internal model from the list of software.
4. Click the Add/Remove button.
5. Click Yes to confirm.
6. If you are prompted to restart the system, click Yes.
Remove the modem hardware from the computer.
Telephone jacks vary by country. The modem cable included with
the computer plugs directly into an RJ-11 telephone jack. To plug
the modem cable into a different type of telephone jack, you must
use a country-specific modem cable adapter. A cable adapter is
provided with the computer. To obtain the country-specific
adapters required for your itinerary, refer to Appendix A to
contact a Compaq-authorized dealer, reseller, or service provider.