Compaq Armada V300 Series Reference Manual page 122

The new password takes effect the next time you turn on the
computer.
Once your setup password has been established, you can delete it
using your computer keyboard. Each computer keyboard is
designed to meet specific country requirements. The syntax for
changing the password varies according to the keyboard
purchased with your computer. To use the character that is
appropriate for your keyboard, refer to the table under "Changing
the Power-On Password."
To delete your setup password, do the following:
1. Save your work, restart your computer, then press
as the cursor moves to the top-right corner of the screen.
2. The password prompt is displayed.
3. Enter your current password, followed by the appropriate
syntax for your computer keyboard. For example, if you have
a Belgian keyboard, you will type the following:
current password=
characters you type do not appear on the screen.
4. The password is deleted.
Several devices can be disabled to prevent the unauthorized
transfer of data using these devices:
Diskette drive
Diskette drive boot ability
Serial port
Parallel port
PC Card slots
To disable or enable a device:
1. Run Computer Setup by turning on or restarting the computer
(StartÆShut DownÆRestart). When the blinking cursor
appears in the upper-right corner of the screen, press
2. Select SecurityÆDevice Security, enter your preferences, then
press F10. You will need to enter your setup password if it is
set.
Type carefully. For security reasons, the
as soon