Compaq Armada V300 Series Reference Manual page 161

Characters on
computer display are
dim
Screen is blank and
the power/suspend
light is on
Screen is blank and
the power/suspend
light is blinking
Screen is blank and
the battery charge
light is blinking
NOTE: The popup windows used to control brightness display correctly
only when you are in an application that supports the popup video
mode. If the popups do not display correctly, exit your application and
press the hotkeys again to invoke the popup windows.
Troubleshooting
The brightness and/or
contrast controls are
not properly set.
A screen blanking
utility has initiated.
Brightness and
contrast need
adjusting.
Screen save has
initiated.
Suspend is initiated.
Computer entered a
low battery condition.
Press Fn+F10 to adjust
brightness.
Press any key and/or
enter your power-on
password to return your
information to the screen.
Press Fn+F10 to adjust
brightness.
Press any key to return
your information to the
screen.
Exit Suspend by pressing
the suspend button.
If possible, immediately
connect the computer to
an external power
source. If an external
power source is not
available, initiate
Hibernation by pressing
+ the power button, or
let the computer
automatically go into
Hibernation.
The computer has not
completed Hibernation
until all lights are off.
Continued