Compaq Armada V300 Series Reference Manual page 109

You can obtain all Compaq system software and firmware, with
download and installation instructions, from the Compaq Internet
site at
Most software is packaged in a compressed file called a
SoftPaq. A compressed file containing a system read only memory
(ROM) is called a ROMPaq.
It is recommended that you use a backup program to create a
backup of the preinstalled software. However, for an additional
cost, you can order the preinstalled software on a CD-ROM or on
diskettes.
If an order form is included with your computer, complete the
form and return it, or call one of the numbers listed on the order
form. If an order form was not included with the computer, refer
to the Compaq worldwide telephone numbers.
Before calling Compaq to place your order, be sure to
have the serial number of your computer available. This number is
necessary for all software backup purchases.
Compaq recommends that you
Install each system read only memory (ROM) update for
your computer model as it becomes available.
Confer with your Information Services department before
updating your system ROM if your system is connected to
a network.
Updating your system ROM will not affect your system
software settings.
Press
number of your system ROM.
If you are unable to display the ROM version number with
you may be able to display it in Computer Setup:
1. Turn on or restart the computer, then press
blinking cursor appears upper-right on the screen.
2. To change the language, press
The number beside System BIOS is the version
when the