Compaq Armada V300 Series Reference Manual page 119

Quick Controls establish security measures on your computer
when it is on but not in use.
QuickLock disables your keyboard and pointing device while
the computer is running. It leaves your information on the
screen but prevents it from being accessed until a power-on
password is entered to enable the keyboard.
QuickBlank, used in conjunction with QuickLock, clears the
screen when the keyboard and pointing device are disabled.
QuickLock on Standby (Suspend) automatically disables the
keyboard and pointing device when the computer enters
Suspend. It prevents your information from being accessed
until a power-on password is entered. Entering the password
allows the computer to exit Suspend and enables the keyboard
and pointing device.
Quick Controls establish security measures on your computer
when it is on but not in use. After setting the power-on password
in Passwords Properties, the following Quick Controls can be
enabled or disabled:
To enable the Quick Controls:
1. Access Password Properties by selecting StartÆSettingsÆ
Control PanelÆPasswordsÆComputer Security tab.
2. Under the Quick Controls section, click in the box to enable
QuickLock, QuickBlank, or QuickLock on Suspend. An X in
the box indicates that QuickLock/QuickBlank is enabled.
You can initiate QuickLock and QuickBlank at any time while the
computer is on. Before initiating these security features, the
following conditions must be met:
A power-on password must be established.
QuickLock and QuickBlank must be enabled.
Once these requirements are met, you can initiate QuickLock
and QuickBlank in two ways: