Table of Contents
Advertisement
Checking the Placement Environment
●
Checking the Placement Environment
●
1
Placement Environment
Your printer must be placed in the following
environment:
Temperature:
Humidity:
Maximum
wet bulb
temperature:
Recommended
environment:
Note
● Be careful of condensation. It may cause a malfunction.
● If placing your printer in a location where the humidity of
the surrounding air is less than 30% RH, use a humidifier
or antistatic mat.
● Do not install near high temperature or the fire.
● Please do not install in a place from which a
chemical reaction is started (laboratory etc.).
● Do not install near the inflammable solution, such
as alcohol and thinner.
● Do not install in the place which the small child's
hand reaches.
● Do not install in an unstable place (the shaky
stand, leaning place, etc.).
● Do not install in a place many humidity, dusty and
the place where direct rays hit.
● Do not install in the environment of briny air and
corrosive gas.
● Do not install in a place with much vibration.
● Do not install in a place where the ventilation hole
of the printer is closed.
● Do not place directly on a rug or carpet with long
strands.
● Do not install in a closed room with poor
ventilation and circulation.
● If you use the printer in a small room for a long
time, please make sure that you ventilate the
room.
● Install away from strong magnetic fields and
sources of noise.
● Install away from monitors or TVs.
10
32°C
-
20%
80% RH
-
(relative humidity)
25°C
17 - 27°C, 50 - 70 % RH
WARNING
CAUTION
Placement Space
Place your printer on a flat surface that is wide
enough that the printer's feet securely on the
surface.
Allow for enough room around your printer as
shown in the images below.
● Top view
60 cm
● Side view
- 16 -
20 cm
100 cm
20 cm
70 cm
Advertisement
Table of Contents
