Oki Pro8432WT User Manual page 80

Other Error Messages
Error
code
Power Off and Wait for a while
126:Condensing Error
USB Hub Unsupported
Please detach it
nnn* Service Call
nnn: Error
3
nnn* Power Off/On
nnn:Error
PDL Error Occurred
Expired saved files have been deleted
Press ONLINE Button
Decode error occurred
Press ONLINE Button
Can not read the file
Press ONLINE Button
Color toner empty. Job cancelled
Press ONLINE Button
E-mail receiving has been cancelled
Press ONLINE Button
Invalid Data
Press ONLINE Button
Job Type restricted
Job rejected
Press ONLINE Button
Please change SD Memory Card
415 Replace Toner
417 %COLOR% Waste Toner Full
Please see HELP for details
Message
<ATTENTION>
indicator
Blinks A condensation has occurred inside a printer.
Turn the printer off and turn on again after
a while.
Goes off A USB hub unsupported by a printer is
connected. Remove the hub.
Blinks A fatal error has occurred inside the device.
Write down the error code and contact your
dealer.
Blinks A fatal error has occurred in a printer.
Turn the power off/on. Contact your dealer if
the same error occurs again.
Varies Indicating that it has been occured an
internal processing error into the PDL
emulation.
It's a clearable warning. User should press
ENTER button for clearing the warning.
Lights up Indicates that an applicable job has been
automatically deleted as the retention period
for Private Job Print has expired.
Varies Indicates that an error has occurred during
analysis of image data input from an
external source.
This appears when an error has occurred
during analysis of TIFF or JPEG data in
USBMemoryPrint, DirectPrint, E-mailPrint
mode.
Varies Indicates that the USB memory is
disconnected while PrintFromUSBMemory
is running. Reading of the image file is
cancelled.
Varies Notifies the user that the color toner is
empty and that the received color data job
is cancelled.
Lights up Indicates that Email receiving has been
canceled.
It has the following possibilities.
- The format of email that has received is
illegal or not supported.
- The attached file is illegal or not
supported.
- The attached file that has received is too
large, for example, file size exceeds 8MB.
- Network connection has disconnected.
Varies Invalid data was received. Press the On-line
switch and eliminate the warning. Displayed
when unsupported PDL command is received or
a spool command is received without SD Card.
Varies A job of a JobLimitation setting violation is
received, and when discarding the job, it's
indicated.
Lights up Indicates that machine requests a user to
exchange old SD card device for new one
because the SD card device is life.
Blinks Indicates that a waste toner box represented
by %COLOR% has become full and needs to
be replaced.
Error 415 : Magenta
Error 417 : White
- 80 -
Cause/Remedy