Oki Pro8432WT User Manual page 79

Error
Message
code
File System is Write Protected
330 Check Belt Unit
Please see HELP for details
Erased Data Full
491 Install Paper
%TRAY%
%MEDIA_SIZE%
Please see HELP for details
File Erasing
Error Postscript
490 Install Paper
MPTray
%MEDIA_SIZE%
Press ONLINE Button
Please see HELP for details
694 Image Drum Not Installed
695 %COLOR%
696
697
Please see HELP for details
340 Check Image Drum
341 %COLOR%
342
343
Please see HELP for details
Wait a Moment
Rebooting <n>
%COLOR% Toner Sensor Error
%COLOR% Toner Not Installed
%TRAY% Empty
Unsupported USB Device Detected
Please detach it
Install Paper
MPTray
%MEDIA_SIZE%
Press ONLINE Button
%COLOR% Waste Toner Full.Replace Toner.
Collate Fail:Too Many Pages
Press ONLINE Button
File System Operation failed<nnn>
Press ONLINE Button
<ATTENTION>
indicator
Lights up The file system to which you tried to write is
write-protected.
Blinks The belt unit is not properly installed.
Reinstall it properly.
Lights up Secret file to be erased are full.
Blinks The indicated tray is empty.
Load the indicated size paper.
491 : Tray1
Lights up Erasing a secret file.
Goes off A postscript error has occurred.
Blinks Paper in the MP tray is empty.
Load the indicated size paper.
Blinks The image drum of the indicated color is not
installed correctly. Install the image drum
correctly.
694 : Yellow (Y)
695 : Magenta (M)
696 : Cyan (C)
697 : White (W)
Blinks The image drum of the indicated color is not
installed correctly. Install the image drum
correctly.
340 : Yellow (Y)
341 : Magenta (M)
342 : Cyan (C)
343 : White (W)
Lights up The printer is restarting.
Please wait.
Lights up Something is wrong with the toner sensor of
the indicated color or the image drum is not
installed correctly.
Install the toner cartridge or image drum of
the indicated color correctly.
Lights up The toner cartridge of the indicated color
is not installed correctly. Install the toner
cartridge correctly.
Lights up The indicated tray is empty.
Load the paper.
Goes off A USB device unsupported by a printer is
connected. Remove the device.
Goes off Load the paper of the size indicated in the
MP tray, and then press the <ON LINE>
button.
Lights up Waste toner is full. Replace with a new toner
cartridge of the indicated color.
Goes off A collate print error has occurred.
Reduce the data amount. If that does not
work, reduce the size of the print data.
Lights up An error of file system for a printer has
occurred.
- 79 -
Other Error Messages
Cause/Remedy
3