Table of Contents
Advertisement
Replacing Consumables and Maintenance Units
3
Insert your finger into the recess on
the right side of the printer and pull the
front cover open lever (1) to open the
front cover (2) forward.
4
4
Press the output tray open button (3)
and open the output tray (4).
CAUTION
● The fuser unit is extremely hot. Do not touch
it.
4
5
Take all the four image drums out of a
printer, and then place them on a flat
surface.
1
2
Possible to get
burned.
3
6
Cover the image drums you took out
with paper so that the image drums do
not expose to the light.
7
Turn the blue locks (5) on each side of
the belt unit in direction of the arrow to
unlock.
5
8
Remove the belt unit by holding the blue
lever (6).
6
- 102 -
5
Advertisement
Table of Contents
