tams elektronik PZS-3 Manual page 4

English
Checking the package contents
Please make sure that your package contains:

one kit, containing the components listed in the parts list
( page 20) and one PCB or

one ready-built module or

one ready-built module in a housing (complete unit),

a CD (containing the manual and further information).
Required materials
For assembling the kit you need:

an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,

a tip-cleaning sponge,

a heat-resistant mat,

a small side cutter and wire stripper,

as necessary a pair of tweezers and long nose pliers,

electronic tin solder (0,5 mm. diameter).
For testing the module you need an electric light bulb.
In order to connect the module you need wire. Recommended
diameters: > 0.25 mm² for all connections.
It is recommended to connect two push-buttons when programming
the module (e.g. push-buttons item no. 85-5212x, x=1,2,3,6,7).
When connecting points at terminus station 2, you need for switching
the points:

a bistable relay 12 V (e.g. item no. 84-61111) or

a relay print RL-2 (e.g. 72-00055 as a kit or 72-00056 as a ready-
built module).
Page 4
PZS-3