Table of Contents
Advertisement
English
Programming step 2: Setting the phases´length
By adjusting the trimmer you set the length of the phases accelerating,
halt and braking for the 5 stops. In state of delivery the phases are set
to the shortest possible length. Test the module with these settings
first. Choose the stop you want to program (see programming step 1)
and prolong the phases by turning the adjusting screw to the right.
N.B: The settings only take effect if you save them before choosing the
next stop for programming (see programming step 3).
Trimmer
Trimmer A
Trimmer B
Trimmer H
Page 34
Phase
R30
Accelerating
R1
Braking
R29
Halt
Length (approx.)
> 1 sec.
> 1 sec.
5 - 150 sec.
PZS-3
Advertisement
Table of Contents
