Fen - Direct IP Idis DC-D4217RX Operation Manual

Part 1 - Remote Setup
IPv6
• Check Use to activate IPv6.
• Type: Select the type of network you are using. If this
option has been changed, click Save to apply the
current settings, and then restart Remote Setup. If you
do not restart Remote Setup, the changes afterwards
will not be applied.
- Manual: Select if using a static IP. You will then be
able to configure the related settings manually.
- DHCP: Select if connected to the network using
DHCP. Click Save to retrieve IP address and other
network settings automatically from the DHCP
server or the router. If it can not be received
automatically, it will be created automatically from
the camera.
• View IP Address Information: The IPv6 address
assigned to the IP camera is shown.
• DNS Server: Enter the DNS server's IP address. If
the camera is connected to the network via DHCP,
select the From DHCP option to retrieve the DNS
server's IP address from the DHCP server or the router
automatically. If it can not be received automatically,
it will be created automatically from the camera.
The updated address will be displayed upon the
subsequent connection.
• Contact your network administrator for more
information on the camera's network connection
type, the DNS server's IP address, and other related
information.
• If using DHCP, the camera's IP address may change
from time to time. We therefore recommend that
you use the FEN feature.
• If using IPv6, some network function may be limited.
12

FEN

Select Use FEN to enable the FEN feature.
• FEN Server: Enter the FEN Server's IP address or
domain name.
• Port: Enter the FEN Server's port number.
• FEN Name: Enter a camera name you wish to register
to the FEN Server. Click OK to check the name's
availability.