Turn On/Off Bluetooth; Change Bluetooth Device Name; Pair Gxv3370 With A Bluetooth Device - Grandstream Networks GXV3370 User Manual

Bluetooth settings are under GXV3370

Turn On/Off Bluetooth

1. Go to GXV3370's SettingsàBasic
2. Check or uncheck Bluetooth option Bluetooth option.
Or, users could open the top status bar Or, users could open the top status barà tap on Bluetooth icon

Change Bluetooth Device Name

The GXV3370 uses "GXV3370XXXXXX
last 6 digits of the phone's Bluetooth MAC address of the phone's Bluetooth MAC address. The device name will be visible to other devices when
connecting them. Follow the steps below to change the name: connecting them. Follow the steps below to change the name:
1. Go to GXV3370's SettingsàBasic
2. Turn on Bluetooth.
3. Select Additional settings.
4. Press "Device name".
5. Enter a name and tap on "Rename

Pair GXV3370 with a Bluetooth Device

Bluetooth Device
Before connecting GXV3370 with other Bluetooth device, users must pair them first. They will stay paired
afterwards unless they are unpaired.
1. Go to GXV3370's SettingsàBasic
2. turn on Bluetooth.
3. Tap Additional settings and select "Visible to nearby Bluetooth devices"
phone visible to all nearly Bluetooth devices. visible to all nearly Bluetooth devices.
4. The GXV3370 scans and displays the IDs of all available Bluetooth devices in range. If scans and displays the IDs of all available Bluetooth devices in range. If scans and displays the IDs of all available Bluetooth devices in range. If the device you
would like to pair with does not show up in the list (available devices), ensure that the other device is would like to pair with does not show up in the list
turned on and set to be discoverable. turned on and set to be discoverable.
5. If the GXV3370 stops scanning before the other device is ready, press stops scanning before the other device is ready, press
6. Once the Bluetooth device shows up in the result, tap on it to start pairing. Confirm the passkey in the Once the Bluetooth device shows up in the result, tap on it to start pairing. Confirm the passkey in the Once the Bluetooth device shows up in the result, tap on it to start pairing. Confirm the passkey in the
prompted message (if any). Or if passcode is required, please refer to the device's documentation or prompted message (if any). Or if passcode is required, please refer to the device's documentation or prompted message (if any). Or if passcode is required, please refer to the device's documentation or
other procedures to obtain the passcode. other procedures to obtain the passcode.
GXV3370's SettingsàBasicàBluetooth.
BasicàBluetooth.
XXXXXX" as Bluetooth device name by default where "XXXXXX" are the as Bluetooth device name by default where "XXXXXX" are the
. The device name will be visible to other devices when
BasicàBluetooth
Rename".
with other Bluetooth device, users must pair them first. They will stay paired with other Bluetooth device, users must pair them first. They will stay paired
BasicàBluetooth
and select "Visible to nearby Bluetooth devices" to make
GXV3370 User Guide
Version 1.0.0.4
to turn it on/off.
to make the GXV3370
, ensure that the other device is
buttonto scan again to scan again.
P a g e | 115