Table of Contents
Advertisement
German Light Products®
Avoiding damage
Do not point the front of the luminaire towards the sun or other strong light sources. The
front lens focuses and concentrates light just like a magnifying glass. Strong light can
cause internal damage to the luminaire, melting components or starting an internal fire
within seconds.
Figure 1. Avoiding damage from light sources
Damage can occur whether the luminaire is powered on or off. See Figure 1.Damage
can also occur if the light hits the front of the luminaire at an angle: the luminaire does
not need to be pointing directly at the sun or other light source.
To avoid problems from strong light sources:
• Do not expose the front of a luminaire to sunlight or any other strong light source.
• For outdoor applications during daylight, make sure that the front face of any
luminaire is shielded or points away from the sun, even when not in use.
• Avoid pointing other high-powered beam lights directly at the luminaire.
Do not pick up or carry the luminaire by the front lens bezel. The LCD display is also
fragile. Picking up or supporting the luminaire in these spots could result in damage
that is not covered by the product warranty.
Use only original spare parts. Any structural modification of the system will void the
product warranty.
Inspect the luminaire regularly and clean it if necessary. Clean the luminaire only as
directed in this manual. Oils, solvents, and other chemicals commonly used for
cleaning can damage the lens coatings and surfaces.
Do not drop the luminaire or expose it to mechanical stress.
Do not expose the luminaire to heat (from other lighting luminaires for example).
Transportation and storage
Transport the impression FR1 TM either in a flightcase or in its original packaging to
protect the luminaire from damage caused by shocks during transportation.
Store the luminaire in a dry location when not in use.
impression® FR1 TM User Manual
9
Advertisement
Table of Contents
