Charge The Battery Before Use; Replace The Battery - Honeywell Dolphin CT40HC User Manual

Charge the Battery Before Use

Dolphin CT40 computers ship with the battery significantly discharged of power.
Fully charge the battery before using your computer for the first time.
You can charge the battery with a Dolphin CT40 series charging accessory before
or after you install the battery in the computer. A fully discharged battery charges
in approximately 6 hours.
To charge the battery before you install it in the computer:
•
To charge the battery after installing it in the computer:
•
Note: Using the computer while charging the battery increases the time required to reach
a full charge.

Replace the Battery

Caution: Improper battery replacement or incompatible device usage may
If your battery power is low, you need to either charge the battery in the computer,
or replace it with a charged battery.
Remove the battery:
1. Save your files and close any open applications.
2. Press and hold the Power button until the options menu appears.
3. Tap Power Off.
Dolphin CT40 Mobile Computer
Insert the battery into the CT40 Quad Battery Charger or the battery well of a
CT40 Standard Home Base or Ethernet Home Base connected to a power
source.
Insert the computer into a CT40 Standard Home Base, Ethernet Home Base,
Charge Base, Net Base, or Snap-On USB Adapter connected to a power source.
result in risk of burns, fire, explosion, or other hazard. Dispose of
lithium-ion batteries according to local regulations. Risk of fire and
burns if improperly handled. Do not open, crush, heat above 60°C
(140°F), or incinerate.
5