Battery Part Numbers; Charge The Battery Before Use; Battery Replacement; Replace The Battery - Honeywell ScanPal EDA5S User Manual

Table of Contents

Advertisement

Battery Part Numbers

EDA5S Models
Battery Model Number
BAT-EDA5S
Caution: Read

Charge the Battery Before Use

The mobile computer ships with a partially charged battery. Charge the battery
with an EDA5S charging device for a minimum of 3 hours.
Note: Using the computer while charging the battery increases the time required to reach
a full charge.
About the USB Type C Connector
You can use a USB cable to charge the mobile computer from a host device (e.g.,
laptop or desktop computer). The connected host device must supply a minimum
power output of 5V, 0.5A to the mobile computer.
Note: If the mobile computer is drawing more current than supplied by the charging source,
charging will not take place.

Battery Replacement

If your battery power is low, you need to either charge the battery in the computer
or replace it with a charged battery.

Replace the Battery

Caution: Improper battery replacement or incompatible device usage may
EDA5S Mobile Computer Series User Guide
Battery Recommendations and Safety Precautions
and all cautionary markings on the battery, charging peripheral, and
device using the battery before attempting to install, use, or charge
the battery.
result in risk of burns, fire, explosion, or other hazard. Dispose of
lithium-ion batteries according to local regulations. Risk of fire and
burns if improperly handled. Do not open, crush, heat above 60°C
(140°F), or incinerate.
Battery Part Number
50177747-001
on page 11
5

Advertisement

Table of Contents
loading

Table of Contents