Table of Contents
Advertisement
Adjust Speaker Volume
Use the Volume button on the left side of the computer to adjust the volume of
ringtones, media, notifications or alarms.
Note: The volume setting varies by OS version.
1. Press either the Volume Up or Volume Down button. The volume slider
2. Depending on OS version:
Enable Vibrate Mode
You can use the Volume button to quickly enable Vibrate mode so the computer
vibrates instead of emitting sound for notifications and rings. If you still want to
hear alarms, turn on the Alarms only feature.
Note: The Vibrate mode varies by OS version.
Depending on OS version:
1. Press the Volume down button until the computer vibrates.
2. To turn on the Alarms only feature, press the Volume Down button again with
OR
1. Press one of the Volume buttons until the volume slider appears.
2. Tap
The status bar at the top of the screen indicates the active mode:
•
•
Audio Settings
This section describes the audio and sound settings you can configure in the
Settings app.
•
Dolphin CT40 Mobile Computer
appears.
•
Tap the down arrow
•
Tap
for Sound settings.
the volume slider open.
to toggle between Vibrate, Off, and On.
When Vibrate mode is active,
When Alarms only mode is active, the Do Not Disturb icon
To change audio settings, start the Settings app
to expand the options, or
appears.
appears.
and tap Sound.
15
Advertisement
Table of Contents
