Table of Contents
Advertisement
Rename or Unpair a Paired Device
You can rename a paired device to make it easier to identify on the list or unpair the
device to remove it from the paired list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Take one of the following actions:
About the Scanner Edge App
Your mobile computer is equipped to communicate with scanners using Bluetooth
technology through the Scanner Edge app. The Bluetooth radio must be turned on.
System bar icons indicate Bluetooth radio status.
To turn on the Bluetooth radio:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. If necessary, tap Off
Connect a Bluetooth Scanner
To connect to a Bluetooth scanner, the Bluetooth radio must be turned on and then
scan a pairing bar code with the Bluetooth scanner.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge
3. Tap the menu icon
4. For Honeywell branded scanners tap Honeywell or for Intermec branded
5. Scan the Scan to connect barcode displayed on screen.
70
> Connected devices > Previously connected devices >
Bluetooth.
next to the paired device.
To rename the device, type the new name, and then tap OK.
•
•
To allow Internet connection sharing or Contact Sharing, tap the check box
next to the settings and then tap OK.
•
To unpair the device, tap Forget.
> Connected devices > Connection preferences > Bluetooth.
scanners tap Intermec.
to toggle the Bluetooth radio On
.
and then tap Pair BT Scanner.
.
Dolphin CT40 Mobile Computer
Advertisement
Table of Contents
