Cal Spas Swim-Pro F-1641 Owner's Manual page 39

Adjusting Filtration
Press Once
Then
7X
Press
Press Light button
to select Filter 2
2018 Fitness Spa
LTR20181146, Rev. M
Main Filtration
Filter cycles are set using a duration. Each setting can be adjusted in 15-minute
increments. Filter Cycle 1 and Filter Cycle 2 (if enabled) are set to the same
duration.
If Filter Cycle 2 is enabled, Filter 2 will appear in the LCD. If Filter 2 is disabled,
Filter 1 will appear.
Shows start Sets start
time hour
to show RUN HRS
Sets Filter 1
length in hours
to show F1 ENDS xx:xx
to set
to set
If you wait several seconds, it
will revert to original setting.
*****
to set
Shows start Sets start
time hour
to show RUN HRS
Sets Filter 2
length in hours
to show F2 ENDS xx:xx
to set
Sets Sets 15- minute
minutes increments
Selects part Sets 15-minute
of an hour increments
to set
Note: Waiting several seconds will lose any
new Filter 1 Start Time and Run Hours and
revert to the previous Filter 1 settings.
Sets Sets 15- minute
minutes increments
Selects part Sets 15-minute
of an hour increments
to set
Note: Waiting several seconds will lose any new
Filter 2 On/Off, Start Time and Run Hours and
revert to the previous Filter 2 settings.
*****
If you wait
several seconds,
it will revert to
original setting.
*****
Main Screen
Main Screen
*****
*****
Main Screen
www.calspas.com
37