Cal Spas Swim-Pro F-1641 Owner's Manual page 36

34
Adjusting the Set Temperature
Press
Then
Press
Set Temp
will show
and flash
Setting Dual Temperature Ranges
Press
Then
Press
Select High Range or Low
Range. Toggle the Range
arrows on the display.
Vacation Setting
Set the spa to operate in the Lower Range temperature choice before you go on vacation.
1. Press the Temp button. The "Set Temp" will show
and flash.
2. Press the Light button. "TEMP" will show on the
display, which give you the choice of High Range
or Low Range.
3. To set the Low Range, press the Light button,
www.calspas.com
Press the WARM or COOL buttons to adjust the set temperature.
Once
When the temperature stops flashing, the spa will heat to the new set temperature
when required. The temperature can be set between 60°F and 104°F.
As
Needed
Press the Temp buttons to
change the temperature.
You can set two temperature range settings with independent set temperatures.
Once The High Range is shown in the display by an "up" arrow and the Low Range with
a "down" arrow. The ranges can be used for different reasons, the most common
being a "ready to use" setting versus a "vacation" setting. (See "Vacation Setting
Once
below.) Each range maintains its own set temperature that you program according
to your needs. This way, when a range is chosen, the spa will heat to the set
temperature programmed to that range.
High Range can be set between 80°F and 104°F.
Low Range can be set between 50°F and 99°F.
The example below shows setting the Low Range temperature.
Set Temp will
show and flash
Main Screen
Press a Temp Button
repeatedly to change the
temperature.
then press the Temp button. The "Set Temp" will
show and flash.
4. Press the Temp buttons to adjust the temperature.
5. Press the Light button or wait several seconds to
return to the main screen.
Main Screen
2018 Fitness Spa
LTR20181146, Rev. M