Cal Spas Swim-Pro F-1641 Owner's Manual page 38

36
Flip (Invert Display)
Press
Then
Press
Locking the Control
Press
Then
Press
Press Light button to
lock control panel
Unlocking the control
While pressing and holding the WARM Button,
press the LIGHT button twice.
Press
Then
Press
www.calspas.com
Once
Inverting the display allows you to be able to read the control panel while you
are in the spa.
4X
Press Temp button to
flip the display
The control can be locked to prevent unwanted use or temperature adjustments.
You can lock the set temperature or the control panel.
Once
Locking the temperature allows Jets and other features to be used, but the Set
Temperature and other programmed settings cannot be adjusted.
5X
Locking the panel prevents the controller from being used, but all automatic
functions are still active.
TO LOCK SET TEMPERATURE
You can toggle between ON and OFF
using the Warm and Cool buttons
TO LOCK THE CONTROL PANEL
You can toggle between
ON and OFF using the
Warm and Cool buttons
Hold Mode
Once
Hold Mode is used to disable the pumps during service functions like cleaning or
replacing the filter. (See page 39 for instruction on cleaning the filter.)
6X
Hold Mode will last for 1 hour unless the mode is exited manually.
Timer will count down for 60 minutes
Main Screen
Main screen
The set temperature
has been locked
Main screen
The control panel
has been locked
Press Press
and hold twice
Main screen
Main Screen
2018 Fitness Spa
LTR20181146, Rev. M