Loading And Saving Menus - TurboChef HHD-9500-1 Owner's Manual

18

LOADING AND SAVING MENUS

Loading and Saving Menus
NOTE: To load or save a menu, you may need to
verify that access to the Load Menu option is turned
on. See page 14 for details.
When loading a menu from USB, the menu must
be in the BIN (binary) format and the files must be
loaded on the root of the USB.
To create a BIN (binary) formatted menu,
1. Using ChefComm, load or create the menu on
your computer.
2. Select Oven > Data Transfer > Create Oven
(BIN) File.
3. Navigate to where you wish to save the menu.
NOTE: If you are saving the menu to a USB drive
and you will use that USB drive to load the menu to
the oven, you must save the menu to the root (top
level) of the USB drive.
4. Name the file.
NOTE: If your version of ChefComm Pro is lacking
these features, contact TurboChef Customer Support
to obtain an update.
To load a menu to the oven,
1. When the oven is off or cooling down, insert the
USB drive (Figure 20). The oven will automati-
cally detect the device.
2. Touch "Load Menu to Oven" to proceed.
3. If more than one menu is on the USB drive, you
will be prompted to pick which menu to load.
To save a menu to a USB drive,
1. When the oven is off or cooling down, insert the
USB drive (Figure 20). The oven will automati-
cally detect the device.
2. Touch "Save Menu to USB" to proceed.
Figure 20: USB Port