Loading A Menu - TurboChef i5 Owner's Manual

14 T H E I N F O M O D E
Figure 14: Inserting Smart Card/USB Device

Loading a Menu

From screen 2 of the Info mode, press the R1 soft key
to access the "Load Menu" screen (Figure 15).
NOTE: This feature can be turned on or off via the
"Options" screen (page 13).
To load a menu to the oven,
1. Insert the source (smart card or USB - see
Figure 14).
2. Press the L1 soft key to load from a smart card,
or the L4 soft key to load from USB* (Figure 15).
3. Verify the oven beeps and reads "FINISHED"
(Figure 16).
* NOTE: To successfully load a menu from USB:
- The menu file must be a binary (.BIN) file
- The menu file name must be
- The menu file must exist in a top-level folder,
i.e., the folder cannot be a sub-folder of any
other folder on the USB device.
- The folder name must be
To save a copy of a menu from the oven,
1. Insert the source (smart card or USB - see
Figure 14).
2. Press the L2 soft key to save to a smart card or
the L5 soft key to save to USB** (Figure 15).
3. Verify the oven beeps and reads "FINISHED"
(Figure 16).
Smart Card
USB Port
Smart Card Reader Slot
MENU.BIN
TC_MENUS
** NOTE: To successfully save a menu to USB:
- The USB device must contain a top-level folder
titled TC_MENUS
- This folder cannot be a sub-folder of any other
folder on the USB device. Rather, it must be
top-level.
L1
LOAD FROM CARD
L2
SAVE TO CARD
L3
L4
LOAD FROM USB
SAVE TO USB
L5
Figure 15: Load Menu Screen
L1
LOAD FROM CARD ++++++++FINISHED
L2
SAVE TO CARD
L3
L4
LOAD FROM USB
SAVE TO USB
L5
Figure 16: Loading...Finished
R1
R2
R3
R4
R5
R1
R2
R3
R4
R5