Assembly Of Cross Stand & Column Unit - HAMPTON BAY FS40-21MA Use And Care Manual

ASSEMBLY OF CROSS STAND & COLUMN UNIT
3. From the extension pole loosen the height adjustment ring and adjust the internal
pole to the desired height. (Note: If you can't find the internal pole, it slides inside
the extension pole. You can pull it out from the extension pole.) Fasten the height
adjustment ring.(Fig.4,5)
Fig.4
4. To attach the head unit to the internal pole, loosen the thumb screw on the bottom of
the head unit. Place the head unit on the internal pole and tighten the thumb screw in
alignment with the groove on the internal pole. (Fig.6)
Fig.5
Tighten
Fig.6
Screw installation hole
Thumb screw
Mounting hole
8
Loosen