ASSEMBLY OF CROSS STAND & COLUMN UNIT
1. Insert the pole assembly into the connector from top to bottom, ensure it is installed
in place(Through the through hole at the bottom of the connector, it can be judged
whether the pole is installed in place) .(Fig.1)
Fig.1
2. Insert 4 stands into the crossbase connector. Ensure the stands are well fixed into the
connector.(Fig.2,3)
Fig.2
Observation hole
Height
adjustment
ring
Pole assembly
Crossbase connector
Fig.3
Stand
Crossbase
connector
7
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM