1. PUBLICATION BREAKDOWN
A. This user instruction manual establishes the standards of operation for the TT1200A Turbine
Temperature Test Set.
Its purpose is to provide sufficient information for the personnel unfamiliar with this Tester to
understand this equipment, identify its parts, and operate it in accordance with proper
procedures, operating techniques, precautions, and limitations.
Note: The manufacturer has designed this equipment to be safe when operated using the
procedures and instructions detailed in this manual. Do not use this equipment for any
other purpose than that stated, as the protection provided by the equipment may be
impaired.
2. INFORMATION PROVIDED WITH THE TEST SET
In addition to this User Instruction Manual, the Test Set is delivered with the items described below.
A. The identification label located on the front bulkhead of the Test Set (Figure 1), provides the
following information:
Equipment Modification (if applicable)
56-101-00930 Revision H
INTRODUCTION
Manufacturer Name
Designation of Equipment
Equipment Part Number
Equipment Model Number
TURBINE TEMPERATURE TEST SET
TT1200A
Figure 1 Identification Label
Equipment Serial Number
Equipment Options (if applicable)
101-00930
Page viii