Gpio Leds (Led1-3); Reset Led (Led4); Power Led (Led5); Battery Charging Led (Led6) - Analog Devices ADSP-BF592 EZ-KIT Lite Manual

LEDs
GPIO LEDs (LED1–3)
Three LEDs (
LED1
eral-purpose I/O pins of the processor (see
active high and lit by writing a "
signal.
Table 2-7. GPIO LEDs
LED Reference Designator
LED1
LED2
LED3

Reset LED (LED4)

When is lit (red), it indicates that the master reset of the processor is
LED4
active. The reset signal is controlled by the Analog Devices ADM13305
supervisory reset circuit.

Power LED (LED5)

When is lit solid (green), it indicates that power is being supplied to
LED5
the board properly.

Battery Charging LED (LED6)

When is lit (yellow), it indicates that the lithium ion battery is
LED6
receiving a charge from either the 5V wall adaptor (
nector ( ).
ZP1
2-16
, , and ) are connected to the three gen-
LED2 LED3
" to the correct programmable flag
1
Processor Programmable Flag Pin
PF0
PF1
PF2
ADSP-BF592 EZ-KIT Lite Evaluation System Manual
Table 2-7). The LEDs are
) or the USB con-
P9