Table of Contents
Advertisement
• OpenVPN Client Mode
1. Checking the "Enable OpenVPN" box activates mode selection buttons. Choose Client
mode, then Client Mode Configuration appears where you can configure Client Mode
Settings.
2. In Client Mode Configuration, you can setup Server URL, Protocol type, Port number, LZO
usage, and Renegotiation time.
– Server URL sets OpenVPN IP address.
– Protocol type, Port number, and LZO setting must match Server setting.
– Default Renegotiation time is 3600 seconds, and 0 means no verification.
– Upload CA certificate issued by Server.
3. Select authentication method between User authentication and Machine authentication.
– For Machine authentication, upload client certificate and client key provided by Server.
– For User authentication, type in registered ID and Password.
4. After finishing setup, click Save button and then the camera operates as an OpenVPN
Client.
When the settings are complete, click Save button to save the settings, or click Reset button to
clear all of the information you entered without saving it.
75
Advertisement
Table of Contents
