Table of Contents
Advertisement
▽ Alarm In
This camera provides 4 Alarm In ports and user can set each ports individually. Each Port can be
given as Normally Open or Normally Close state, and their Normal state can be configured. In
order to use an alarm port, check the desired "Enable alarm port #" first.
• Type: Choose the type of alarm to use from the drop-down list, NO (Normally Open) or
NC (Normally Closed).
• Dwell Time: Set the dwell time an event lasts from the point of detection of an alarm input.
When the settings are complete, click Save button to save the settings, or click Reset button to
clear all of the information you entered without saving it.
40
Advertisement
Table of Contents
