Table of Contents
Advertisement
6) View Angle
• View Angle Setting:
– Tilt angle limit: This option is designed to limit the view angle as there is some obstruction
in zooming out on specific areas of the tilt angle.
– Flip:
* Off: The dome camera moves until 90° vertically.
* Auto: When the camera reaches the floor directly above the moving object, it will stop. At
that time, release instantly and pull it down again to run the auto-flip function. When you
use the panning range, it is recommended to use the flip mode to Auto.
– Enable pan angle range setup: When the dome camera is installed near a wall, pan angle
range can be limited by user.
* Right limit: Select the right limit of pan angle range.
* Left limit: Select the left limit of pan angle range.
When the settings are complete, click Save button to save the settings, or click Reset button to
clear all of the information you entered without saving it.
68
Advertisement
Table of Contents
