Table of Contents
Advertisement
▽ Audio Alert
When the network camera detects an event, it can output a predefined audio data to external
speaker. Check the "Enable audio alert" box to enable the service.
• Audio Alert Setting: To use the audio alert with the network camera, an audio data file made
by user must be uploaded from your PC. Provide the path to the file directly, or use the
Browse button to locate it. Then click the Upload button. Up to 3 audio files are available. The
total file size must be less than 512 KB.
• Audio Alert Test: When the setup is complete, the audio output can be tested by clicking the
Test button. To remove an audio file, select the file and click the Remove button.
NOTE: For a proper operation of Audio Alert, full duplex must be enabled in the Audio settings
page.
When the settings are complete, click Save button to save the settings, or click Reset button to
clear all of the information you entered without saving it.
53
Advertisement
Table of Contents
