Table of Contents
Advertisement
2) Event Out
▽ SMTP(E-Mail)
The network camera can be configured to send event and error email messages via SMTP (Simple
Mail Transfer Protocol).
• SMTP (E-Mail) Setting: Select "Enable" to activate the SMTP operation.
– Sender: Enter an email address to be used as the sender for all messages sent by the
network camera.
– Interval: Represents the time interval of the email notification when events occur several
times.
– Aggregate events: Shows the maximum number of emails sent within each interval.
– Use Mail Server: Check the box if you are using a mail server to receive event notification
and image email.
* Mail Server: Enter the host names (or IP addresses) for your mail server.
* Port: Enter the port number for your mail server. Enable the sending of notifications and
image email messages from the network camera to predefined addresses via SMTP.
* Connection security: Select a connection security type in the drop-down list:
None / StartTLS / SSL
* User name/Password: Enter the User name and Password as provided by your network
administrator or ISP (Internet Service Provider).
* Login method: Choose a log-in method in the drop-down list:
AUTH LOGIN / AUTH PLAIN
• SMTP (E-Mail) Receiver: User can assign up to 8 receivers.
– Receiver #: Enter an email address.
50
Advertisement
Table of Contents
