Table of Contents
Advertisement
3) Pattern
Pattern is a series of pan, tilt, and zoom movements programmed by administrator or operator. Up
to 8 patterns may be programmed for the dome camera.
Follow steps below to program the Patterns:
1. Click the Set button of desired Pattern number of Pattern Setting list, and move pan, tilt, and
zoom using Control box. The movement history is automatically recorded.
2. Click Done button after you completed the camera movement program.
3. Repeat step 1 through 2 for each desired Pattern number.
4. If you are not satisfied with the programed pattern, click X button to clear the pattern.
5. You can edit title of each pattern number for easier recognition.
NOTE 1: Each Pattern can store up to 500 seconds of movements.
NOTE 2: The percentage total of 8 Patterns cannot exceed 100.
65
Advertisement
Table of Contents
