Table of Contents
Advertisement
• Connecting the Power
1. 12VDC model
Connect power of 12VDC for the camera.
Connect the positive (+) pole to the '+' position and the negative (-) pole to the '-' position.
– Be careful not to reverse the polarity when you connect the power cable.
2. PoE & 12VDC model
Connect power of 12VDC for the camera.
Connect the positive (+) pole to the '+' position and the negative (-) pole to the '-' position.
– Be careful not to reverse the polarity when you connect the power cable.
– If you use PoE to supply power to the camera, you must use the PoE (Power over
Ethernet) injector provided by the manufacturer.
14
Advertisement
Table of Contents
