Installation; Installing And Adjusting Camera - Eneo IEB-74M2812MAA Quick Installation Manual

Installation

Installation
For the operation of the Network Camera, it is necessary to connect a network cable for
data transmission, power connection from supplied power adapter. Depending on opera-
tion methods, it is possible to connect an alarm cable additionally.
The network camera should be attached to a structural object, such as hard wood, wall
stud or ceiling rafter that supports the weight of the network camera. For its fixation on
different locations, please consult with an installer.

Installing and Adjusting Camera

1. Using the template sheet make mounting holes and cable hole in the place (ceil-
ing or wall) to which the camera is to be installed.
2. Fix the base of the camera with the three screws (20mm tapping screws) provided
in the accessory kit.
CAUTION: Adjusting the position of the camera after installation could potentially dam-
age the cable.
6
3x Screws